CK Fires AFINA Průvodce řešením problémů stáhnout pdf (Strana 12)

FUEL BED LAYOUT

Pebble EEffect OOption

1. Refer back to section 12.0 - Fuel bed layout (coal

effect option) and follow steps 1 and 2. The front strip

and fuel effect matrix used for pebble effect versions

are of the same design as coal effect versions, but

have a different surface finish.

2. Open the bag of 16 ceramic pebbles. All of these

pebbles are the same. Take five pebbles and place

them as shown. Care should be taken to ensure that

the pebbles bridge the gap between the front strip

and the four supports at the front of the matrix. Care

should also be taken not to push the pebbles right

down between the supports, as this can affect the

flame picture when the appliance is running.

3. Take five more ceramic pebbles and position as

shown to form the ‘second row’ of the fuel effect. The

pebbles may be rotated as desired to fit into the gaps

between the supports in order to create a random,

realistic effect. Again, remember not to push the peb-

bles down too far into the valleys between the sup-

ports as this can have a detrimental effect to the flame

picture.

4. Now take another two pebbles and place behind

the second row of coals, next to each other in the

centre of the fuel bed. The pebbles may be orientated

as desired to achieve a realistic effect. Keep the spac-

ing between the pebbles even and uniform.

12.1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Žádné komentáře

CK Fires AFINA Průvodce řešením problémů Strana 12